Shooting range electronics
Modern shooting ranges require an enormous degree of automation and electronic management of all the elements that compose them, from the target launchers to the refereeing and scoring elements, through voice launch systems, wireless, or even payment systems at the foot of the pitch.
All these electronic elements require equipment, development, installation and maintenance that at Elicio.es we are capable of offering the entire range of products and services involved.
RADIO CONTROL SYSTEMS
Used to start, stop and operate remote launching machines. They allow various actions in the operation of the shooting range machinery.
RCL-08
- Range up to 500mts
- 8 channels for managing 8 machines
- Allows simultaneous up to 8 machines at once
- Configurable frequency for Europe / USA / Canada
- Low power consumption. No consumption on STAND BY mode
Ergonomic design
Includes:
- Transmitter
- 3 Batteries AAA
RCL-03
- 3 buttons for 1st Zero, 2nd Zero and NO TARGET
- Specially designed for referee box “Progetti” for EP095M
- Range up to 500mts
- Low power. Only need a simple battery
It includes:
- Device
- 3 AAA batteries
MicroRC-LO-RB
Microreceiver for referee control Progetti.
- Inserted inside the Progetti control box
- Wireless operation with RCL-03 control
RC-LCD-LO
Long distance transmitter control with LCD display.
- Up to 45 fields/ 8 machines per field
- Range 500 mts
- 50,000 clays launched with a single battery charge
- USB Type-C charger.
- Configurable frequency for Europe / USA / Canada
- Chip card reader / SD card reader
- Export reports to Multipull system with chip cards
- Allows to set shooting sequences with automatic release
- Warning sound signal for NOT ACTIVATED Machine
Option to connect a microphone for voice release
RC-LCD-CHARGER
Chip card charger with LCD display.
- Allows you to set different typologies and prices
- Create, delete, configure… chip cards
- Export accounting data to Multipull from device
- With indelible odometer of the recharges recorded
SC-PC
Interface for PC.
- Chip card programmer
- Allows you to download accounting data to the software provided by ELICIO.ES of all interconnected devices
- Compatible with Multipull system
RC-LCD-LO-INOX
Long distance transmitter control with LCD display.
- Same features as model RC-LCD-LO
- Protective box in stainless Steel
- Solar charging
SC-RD
Chip Cards reader device.
- Normal or continuous credit discharge mode
- Can alternate 2 differents disciplines
- Shows the total number of series released
- Automatic chip card reader
- Compatible with EP-ELI-02 and EP095M control units
SC-LO-SP
Chip Card reader device specific for Sporting.
- Normal or continuous credit discharge mode
- Managed with RCL-08
- Up to 8 machines
- Allows delayed releases
- Shows the total number of series released
- Automatic chip card reader
- Solar charging
SC-LO-AT
Chip Card reader device specific for American Trap.
- Normal or continuous credit discharge mode
- Shows the total number of series released
- Automatic chip card reader
- Solar charging
Transmitters
EMI-LO-6
Long distance transmitter for control unit.
- Range 500mts
- 6 machines
- Configurable frequency for Europe / USA / Canada
- Easily configurable
EMI-LO-15
Long distance transmitter for control unit.
- Range 500mts
- 15 machines
- Configurable frequency for Europe / USA / Canada
- Easily configurable
EMI-LO-EP
Long distance transmitter for installation inside the EP095M control unit.
EMI-LO-A
Adapter for EMI-LO to Progetti control unit EP095M.
Receivers
RC-LO-LAP
Long distance receiver
- Range up to 500 mts
- Up to 15 machines simultaneously (Adding relay board)
- Configurable frequency for Europe / USA / Canada
- Easily programmable without opening the box
- Up to 40V
- For machines Laporte, Matarelli…
RC-LO-PRMTC
Long distance receiver for Promatic machine, …
microRC-LO
Wireless long distance receiver
- Range up to 500 mts
- 1 Channel
- Wireless
- Configurable frequency for Europe / USA / Canada
- Easily programmable without opening the box
- Up to 12V
Extender for RC-LO receiver range 2mts
PRL-LAP
For machines Laporte, Matarelli,…
PRL-PRMTC
For machines Promatic …
microRC-LO-SC
Long distance receiver without connector
- Range up to 500 mts
- 1 Channel
- Without conector
- Configurable frequency for Europe / USA / Canada
- Easily programmable without opening the box
- Up to 12V
- Valid for Promatic, Laporte, Matrelli
CON-LAP
Connector for machine Laporte, Matarelli …
CON-PRMTC
Connector for machine Promatic …
Antenas
RX-TX
Repeater antenna with solar charge
ANTENA MULTI-DIRECCIONAL
Gain 6 dBi
ANTENA UNI-DIRECCIONAL
Gain 10 dBi
CONTROL UNITS
Hunting Tours are a sporting modality that simulates hunting shooting, with the targets being plates that are thrown into the air or rolled to simulate the movement of an animal. It is done shooting from a fixed position.
WE DESIGN, BUILD AND PROGRAM CONTROL UNITS FOR ALL TYPES OF SHOOTING MACHINES AND DISCIPLINES.
EP-ELI-02
Specially designed and developed for the disciplines of HELICES and PIGEON
Set of 5 machines (extendable up to 9 machines) and pigeon (up to 15 cages).
Includes signal and microphone wiring harnesses. Microphone with stand and microphone to avoid interferences and ambient noise.
- Internal speed control for ELIMATIC machines
- Up to 8 microphones
- Connection for coin reader and chip card system
- Control interface for external referee
- Connection interface for via radio system
- Industrials plugs
- Active microphone signal (LED lamps).
- Power supply 110VAC 240VAC
- Supported frequency: 47Hz 63Hz
- Maximum consumption: 40W
- Output: 12V DC 2 Amp
- Supported temperature: -5°C to + 55°C
- Internal protection: 1 A fuse at the input
- Automatic protection at 12VDC output
- Lightning protection: varistors, transil.
- Dimensions: 390 x 260 x 135 mm. Weight: 4 kgs.
DS-R-01
Control unit valid for American Trap and Double American Trap.
- Phonic group by Progetti. Up to 5 microphones
- Microphones sequential activation
- For Coin box or Chip card
- External referee interface
- Via radio interface
- Input voltage: 12VDC; Consumption 12W
- Output voltage: 12/5 VDC 0.5A max
- Operating temperature: -10ºC to + 45ºC
PHONIC GROUP PROGETTI. UP TO 5 MICROPHONESS.
DISCIPLINES
American Trap, Double Trap.
- 1 Control Unit
- 5 MIC/8Ω/JACK
- Wiring harness for microphones (5 individual cables to each microphone)
- Wiring harness from the control unit to the Trap
FILES, COIN BOXES AND CARD READERS
For shooting ranges with payment or identification systems at the foot of the range, we have payment solutions using cash, tokens or identification cards completely connected to the range’s central control system.
Para campos de tiro con sistemas de pago o identificación a pie de cancha disponemos de soluciones de pago mediante dinero en metálico, fichas o tarjetas identificativas completamente conectados al sistema central de control del campo.
SC-RD-XL
Chip Cards reader device
- Normal or continuous credit discharge mode
- Handles up to 2 control units simultaneously
- Can alternate up to 9 different disciplines
- Automatic selection of discipline
- Shows the total number of series released
- Automatic chip card reader
- Export reports to Multipull system with chip cards
- 3 Buttons
- Wall mount
SC-CHARGER
Cashier for recharging chip cards with banknotes
- Accepts Euro banknotes, Dollars, Mexican Pesos, Pounds and any other legal tender currency (on request)
- High strength metalic case and safety lock.
- Record movements and send reports via radio for accurate and real-time accounting
- Reports visible on the ATM screen
TOKEN READERS
F-EP
High quality electronic coin reader
- Metal box with key lock
- Automatic return of tokens
- For Progetti and EP-ELI-02 control units
F-EP-LCD
High quality electronic token with LCD display
- LCD display (shows number of shooters, order, round and position)
- Metal box with key lock
- Automatic return of tokens
- For EP-ELI-02 and DS-R-01 control units